Het wil me maar niet lukken om scherpe foto's te maken.
Een voorbeeld van een onscherpe foto waarbij ik scherp gesteld heb op één van de oogjes:

Dit zijn de EXIF-gegevens:
Camera Make = PENTAX Corporation
Camera Model = PENTAX K200D
Picture Orientation = normal (1)
? (0x0000) = 0x00,0x00,0x00,0xba
Y-Resolution = 72/1 ===> 72
X/Y-Resolution Unit = inch (2)
Software / Firmware Version = K200D Ver 1.00
Last Modified Date/Time = 2012:06:23 10:26:03
Y/Cb/Cr Positioning (Subsampling) = co-sited / datum point (2)
Print Image Matching = PrintIM
version = 0300
Exposure Time (1 / Shutter Speed) = 1/100 second ===> 0.01 second
Lens F-Number / F-Stop = 45/10 ===> ƒ/4.5
Exposure Program = normal program (2)
ISO Speed Ratings = 400
EXIF Version = 0221
Original Date/Time = 2012:06:23 10:26:03
Digitization Date/Time = 2012:06:23 10:26:03
Components Configuration = 0x01,0x02,0x03,0x00 / YCbCr
Exposure Bias (EV) = 3/10 ===> 0.3
Metering Mode = center weighted average (2)
Flash = Flash did not fire, compulsory flash mode
Focal Length = 6500/100 mm ===> 65 mm
FlashPix Version = 0100
Colour Space = sRGB (1)
Image Width = 3872 pixels
Image Height = 2592 pixels
Image Sensing Method = one-chip color area sensor (2)
Image Source = 0x03,0x01,0x45,0x78
Scene Type = 0x01,0x45,0x78,0x69
Custom Rendered = normal process (0)
Exposure Mode = manual exposure (1)
White Balance = auto (0)
Focal Length in 35mm Film = 97
Scene Capture Type = standard (0)
Contrast = hard (2)
Saturation = high (2)
Sharpness = hard (2)
Subject Distance Range = close view (2)
Is er misschien iets mis met de instellingen?